灌满了求你们停下np,成人毛片18女人毛片免费,他揉捏她两乳不停呻吟,被三个老头捆着躁我一个爽文

撥號18861759551

你的位置:首頁 > 技術文章 > 單色光學像差

技術文章

單色光學像差

技術文章

Chromatic and Monochromatic Optical Aberrations

Designing optical systems is never an easy task; even perfectly designed systems contain optical aberrations. The trick is in understanding and correcting for these optical aberrations in order to create an optimal system. To do so, consider the types of aberrations present in optical systems.

 

Optical aberrations are deviations from a perfect, mathematical model. It is important to note that they are not caused by any physical, optical, or mechanical flaws. Rather, they can be caused by the lens shape itself, or placement of optical elements within a system, due to the wave nature of light. Optical systems are typically designed using first order or paraxial optics in order to calculate image size and location. Paraxial optics does not take into account aberrations; it treats light as a ray, and therefore omits the wave phenomena that cause aberrations.

 

Optical aberrations are named and characterized in several different ways. For simplicity, consider aberrations divided into two groups: chromatic aberrations (present when using more than one wavelength of light) and monochromatic aberrations (present with a single wavelength of light).

 

CHROMATIC ABERRATIONS

Chromatic aberrations are further classified into two types: transverse and longitudinal. Longitudinal can then be either primary or secondary longitudinal chromatic aberration.

 

Transverse chromatic aberration (TCA) occurs when the size of the image changes with wavelength. In other words, when white light is used, red, yellow, and blue wavelengths focus at separate points in a vertical plane (Figure 1). In optical terms, 656.3nm (red) is referred to as C light, 587.6nm (yellow) as d light, and 486.1nm (blue) as F light. These designations arise from their hydrogen emission lines for C & F lights and helium for d light.

 

Longitudinal chromatic aberration (LCA) occurs when different wavelengths focus at different points along the horizontal optical axis as a result of dispersion properties of the glass. The refractive index of a glass is wavelength dependent, so it has a slightly different effect on where each wavelength of light focuses, resulting in separate focal points for F, d, and C light along a horizontal plane (Figure 2).

Figure 1: Transverse Chromatic Aberration of a Single Positive Lens

Figure 2: Longitudinal Chromatic Aberration of a Single Positive Lens

Figure 3: Achromatic Doublet Lens Correcting for Primary Longitudinal Chromatic Aberration

Primary LCA correction is usually performed using an achromatic doublet lens, which is made of positive and negative lens elements of different refractive indices (Figure 3). This type of correction forces F and C light to focus at the same place, but has little effect on the location of the d light focus, which leaves residual chromatic aberration.

 

In order to correct this residual LCA, a more complex lens or lens system must be used to shift the focus of d light to be at the same axial location as the F and C focus. This type of correction is usually achieved by using an apochromatic lens, which is corrected such that three wavelengths focus at the same point, or a superachromatic lens, which is corrected such that four wavelengths focus at the same point. Figures 4a – 4d show a comparison in focus shift between the aforementioned types of lens systems.

Figure 4a: Focus Shift Illustration of No Aberration Correction with a Singlet Lens

Figure 4b: Focus Shift Illustration of Primary Longitudinal Chromatic Aberration Correction with an Achromatic Lens

Figure 4c: Focus Shift Illustration of Secondary Longitudinal Chromatic Aberration Correction with an Apochromatic Lens

Figure 4d: Focus Shift Illustration of Secondary Longitudinal Chromatic Aberration Correction with a Superachromatic Lens

 

MONOCHROMATIC ABERRATIONS

By far, monochromatic aberrations outnumber chromatic aberrations. Therefore, they are labeled with wavefront coefficients in addition to names. For example, spherical aberration has a wavefront coefficient of W040. This wavefront coefficient arises from the mathematical summation that gives the actual difference between the perfect and aberrated wavefronts:

In Equation 1, Wklm is the wavefront coefficient, H is the normalized image height, ρ is the location in the pupil, and θ is the angle between the two, which arrives due to the dot product of the two vectors. Once the wavefront coefficient is known, the order number can be determined by adding l and k. However, this will always create an even number. Since optical aberrations are often referred to as first, third, fifth order, etc, if k + l = 2, it is a first order aberration, if k + l = 4, it is a third order, etc. Generally, only first and third order aberrations are necessary for system analysis. Higher order aberrations exist, but are not commonly corrected in optical systems because of the complication this adds to the system. Usually, the complexity of correcting higher order aberrations is not worth the image quality improvement. Common third order monochromatic aberrations and their corresponding coefficients and equations are listed in table 1.

Aberration Name

Wavefront Coefficient

Equation

Tilt

W111

W111Hρcos(θ)

Defocus

W020

W020ρ2

Spherical

W040

W040ρ4

Coma

W131

W131Hρ3cos(θ)

Astigmatism

W222

W222H2ρ2cos2(θ)

Field Curvature

W220

W220H2ρ2

Disortion

W311

W311H3ρcos(θ)

Table 1: Common Third Order Optical Aberrations

 

Optical and imaging systems can contain multiple combinations of optical aberrations. These optical aberrations can be classified into either chromatic or monochromatic. Aberrations will always degrade image quality, and a very large portion of optical design is focused on recognizing and reducing these aberrations. The first step in correcting for aberrations is to understand the different types and how they affect system performance. With this knowledge, one can then design the best system possible. For in-depth information on identifying and correcting for chromatic and monochromatic aberrations, view Comparison of Optical Aberrations.

聯系我們

地址:江蘇省江陰市人民東路1091號1017室 傳真:0510-68836817 Email:sales@rympo.com
24小時在線客服,為您服務!

版權所有 © 2025 江陰韻翔光電技術有限公司 備案號:蘇ICP備16003332號-1 技術支持:化工儀器網 管理登陸 GoogleSitemap

在線咨詢
QQ客服
QQ:17041053
電話咨詢
0510-68836815
關注微信
孕妇高潮xxxxx孕妇| 五月天激情国产综合婷婷婷| 人人妻人人澡人人爽人人dvd | 我和闺蜜在ktv被八人伦| 精品一区二区三区在线观看| 国产精品99久久久久久| 999zyz玖玖资源站永久无码| a片在线免费观看| 尤物视频在线观看| 男男受被攻做到腿发颤高h漫画| 啊灬啊灬啊灬快灬高潮了听书| 欧美熟妇另类久久久久久多毛| 亚洲熟女乱综合一区二区| 挺进同学熟妇的身体| 日本又色又爽又黄的a片吻戏| 国产精品扒开腿做爽爽爽视频| 国产亚洲精品麻豆一区二区 | 熟女少妇精品一区二区| 性xxxx视频播放免费| 两腿间花蒂被吸得肿了视频| 熟妇高潮精品一区二区三区| 中文在线最新版天堂| 无码人妻少妇色欲av一区二区| 免费无码毛片一区二区app| 几个东北熟妇的性经历| 精品一区二区三区在线观看| 亚洲成AV人片一区二区| 性视频播放免费视频| 女人脱精光让人桶爽了| 免费观看a级片| 色欲狠狠躁天天躁无码中文字幕| 狂野欧美性猛交XXXX| 黑人50厘米全部进去| 高h全肉np放荡日记| 亚洲6080yy久久无码国产| jizz国产精品网站| 精品久久久久久中文字幕| 女干部光着屁股让领导玩| 偷窥 性别 瘾 xxxxx| 息与子猛烈交尾在线播放| 漂亮人妻洗澡被公强 日日躁|